Storage - Echo ProPaddle SRM-2400SB Operator's Manual

Hide thumbs Also See for ProPaddle SRM-2400SB:
Table of Contents

Advertisement

99944200620
7.
Replace the cover and install the four side-plate screws.Tighten
securely.
8.
Reinstall the drum and axle assembly. Refer to the section "Assembly:
Sweeper Assembly" for instructions.

STORAGE

1.
Remove ProPaddle sweeper
drum assemblies and drum
axles.
Do not immerse the gearcase or driveshaft in water. Water will enter
gear housing and damage gears, bearings and seals.
2.
Inspect ProPaddle belts and fins for excessive wear and damage. Have
Echo dealer replace paddle belts if fins are worn excessively or
distorted, or if belts are damaged.
3.
Clean ProPaddle sweeper
drums and reusable belts with
water.
X7532093907
© 1/2017 ECHO Inc.
STORAGE
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents