Install The Ion 1000 By Replacing An ExisNg Router - PaloAlto Networks ION 1000 Hardware Reference Manual

Install the ION 1000
Install the ION 1000 by Replacing an Exisng Router
Install the ION 1000 to replace an exisng router, directly terminang the MPLS, especially in
environments where routers are not already present or required.
Configure the ION 1000 as a drop-in replacement for the WAN Router. This mode is most useful
for saving cost at new sites that are designed without a tradional router in mind.
While this mode is used to remove an exisng router at a site, it is somemes preferred to deploy
with an exisng router. In such a scenario, the exisng router is unplugged or disabled aer all
funcons are verified.
ION 1000 Hardware Reference
26
2021 Palo Alto Networks, Inc.
©