Wall Mount The Ion 1000 - PaloAlto Networks ION 1000 Hardware Reference Manual

Install the ION 1000

Wall Mount the ION 1000

Wall mount the ION 1000 using the oponal wall mounng kit that includes ear brackets.
STEP 1 | Gather the wall mounng brackets, also referred to as the ear brackets.
These brackets enable you to anchor the ION 1000 to the wall.
STEP 2 | Place the ION 1000 upside down and locate the four (4) screw holes on each corner of the
device.
STEP 3 |
Place the ear brackets on each side of the device and align the screw holes on the bracket
and the device.
STEP 4 | Fasten the ear brackets with the screws to secure the brackets.
STEP 5 |
Place the device on the wall where you plan to mount it and mark the wall to insert the wall
anchors for each screw hole.
STEP 6 | Use a power drill to apply the four (4) white wall anchors into the screw holes.
STEP 7 |
Insert the screws parally into the anchors, leaving a ny gap to hang the ear bracket.
STEP 8 |
Hang the device onto the wall, making sure to match the four (4) screw holes on the ear
bracket with the four (4) screws on the wall.
STEP 9 | Fasten the screws securely to mount the device on the wall.
ION 1000 Hardware Reference
24
2021 Palo Alto Networks, Inc.
©