Installation
SBI (Semi Built-In, DW60M9***S*) models
B
C
B
16
English
DW9000M_DD68-00193G-00_EN.indd 16
A
C
B
6. Put the installation template on the
back of the custom panel.
• For A: Align the marks on the
installation template to the top edge of
the custom panel.
• For B: Align the marks on the
installation template to the bottom edge
of the custom panel.
7. Use transparent tape to temporarily fix
the installation template to the custom
panel.
8. On the custom panel, mark the location
of the 6 screw holes according to the
installation template.
NOTE
The rear of the custom panel will be
attached to the dishwasher door.
CAUTION
Use a custom panel between 2.5 kg and
8 kg.
9. Remove the installation template and
tighten the custom panel fixers (B) near
the bottom with 2 screws (C, Ø4 X 16)
as shown.
8/30/2018 4:03:50 PM