Download Print this page
Russound CA 6.4 LRN Instruction Manual
Russound CA 6.4 LRN Instruction Manual

Russound CA 6.4 LRN Instruction Manual

Learning keypad

Advertisement

Quick Links

Reset Procedure Instructions
The Reset button is used to restart the LRN Keypad if any problem occurs
during programming. If the LRN Keypad locks-up for any reason, follow
the below procedure:
1) Press the Reset button (shown in Figure 3).
2) The Program indicator will illuminate momentarily.
3) The LRN Keypad will now operate properly. No stored information will
be lost.
Figure 3
PROGRAM BUTTON
CLEAR BUTTON
RESET BUTTON
PAUSE
Operation Instructions
1) Read the KP Control Features section of the CA-Series Multi-Zone
Controller manual.
2) Select the source that you wish to control on the KP (This will also
select the source for listening.).
3) Press the command key(s) on the LRN which have been programmed
with the commands that you wish to execute.
4) The Program indicator will flash as the command is outputted. If the
Program indicator does not flash when the command key is pressed,
the command was not stored properly.
Limited Warranty
The Russound CA LRN are fully guaranteed for Two (2) years from the date
of purchase against all defects in materials and workmanship. During this
period Russound will replace any defective parts and correct any defect in
workmanship without charge for either parts or labor. For this warranty to
apply, the unit must be installed and used according to its written
instructions. If service is necessary, it must be performed by Russound. The
unit must be returned to Russound at the owner's expense and with prior
written permission. Accidental damage and shipping damage are not
considered defects under the terms of the warranty. Russound assumes no
responsibility for defects resulting from abuse or servicing performed by an
agency or person not specifically authorized in writing by Russound.
Damage to or destruction of components due to improper use voids the
warranty. In these cases the repair will be made at the owner's expense. To
return for repairs, the unit must be shipped to Russound at the owner's
expense, along with a note explaining the nature of the service required.
Be sure to pack in a corrugated container with at least 3 inches of resilient
material to protect the unit from damage in transit.
SELECT
MODE
PROGRAM INDICATOR
REW
FF
STORED INDICATOR
ERROR INDICATOR
DISC
SELECT
IR RECEIVER DIODE
CHANGE
STOP
PLAY
SCAN
CA 6.4 LRN
Learning Keypad
Instruction Manual
SELECT
MODE
REW
FF
DISC
SELECT
CHANGE
STOP
PLAY
PAUSE
SCAN

Advertisement

loading

Summary of Contents for Russound CA 6.4 LRN

  • Page 1 Limited Warranty The Russound CA LRN are fully guaranteed for Two (2) years from the date of purchase against all defects in materials and workmanship. During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor.
  • Page 2 Product Overview Installation Instructions The CA 6.4 LRN Keypad is an accessories to the CA-Series Multi-Zone 1) Using the (4) provided 3/4” flat-head screws, install the two connected Control Systems. The LRN connects to the CA KP Keypad via a 16 pin keypads into a double-gang junction box or plaster ring.