Technical Description - Dometic BORDBAR AS 25 Operating Manual

Technical description

5 Technical description
The cooler is suitable for mobile use. It can cool goods to max. 18 °C under the
ambient temperature or keep them cool.
Its cooling system is a non-wearing Peltier cooling, the heat is discharged by a fan.
When the cooler is connected to a 230 V AC mains supply, it can be used in two
different operating modes:
• ECO mode: the cooler consumes less energy
• MAX mode: the cooler reaches maximum cooling capacity
The desired cooling capacity is selected with the cooling capacity control:
➤ To increase the cooling capacity, turn the cooling capacity control clockwise.
For the maximum cooling capacity turn the cooling capacity control clockwise
all the way to the stop (max position).
➤ To decrease the cooling capacity, turn the cooling capacity control
counterclockwise.
To turn off the cooler, turn the cooling capacity control counterclockwise all the
way to the stop (off position).
When the cooler is connected to the DC socket, the cooling capacity cannot be
adjusted. In this case the cooler cools maximal.
Pockets on the outside provide additional storage space. Note that objects stored in
them are not cooled.
5.1 Description of the device
No. in
fig. 1, page 3
1
2
3
4
10
Description
Shoulder strap
ECO cooling capacity control
Ventilation slots
Handle
Autogoods "130"
BordBar AS25
EN