Servicing & Cleaning; Servicing; Keep The Inside Of The Microwave Clean; Keep The Outside Of The Microwave Clean - John Lewis JLMWCM006 User Manual

Servicing & cleaning

Servicing

This microwave must only be serviced by an authorised
service technician and only genuine spare parts must
be used.
Under no circumstances must you attempt to repair
the microwave yourself. Repairs carried out by an
inexperienced persons may cause injury or serious
malfunction.
Keep the inside of the
microwave clean
Caution - Do not use harsh detergent
or abrasive cleaners.
• Food spatters or spilled liquids stick to microwave
walls and between the seal and door surfaces. Wipe
up spillovers with a damp cloth straight away.
• Crumbs and spillovers will absorb microwave energy
and lengthen cooking times. Use a damp cloth to
wipe out crumbs that fall between the door and
the frame. It is important to keep this area clean to
assure a tight seal.
• Remove greasy spatters with a soapy cloth then
rinse and dry.
• The metal tray can be washed by hand and is
dishwasher proof.
Microwave/grill/convection user guide
Keep the outside of the
microwave clean
Caution - Do not use abrasive
materials, such as cleaning powders
or steel and plastic pads.
Caution - Do not use steam cleaners.
• Clean the outside of the microwave with soap and
water then with clean water and dry with a soft
cloth or paper towel.
• To prevent damage to the operating parts inside
the microwave, the water should not be allowed to
seep into the ventilation openings.

Cleaning the control panel

• Unplug the microwave from the electrical socket
when you clean control panel with wet cloth or
spray water on control glass to clean.
- If it is not unplugged, the microwave can be
Start/Quick Start
operated by pressing the
button.
• To clean control panel, open the door to prevent
the microwave from accidentally starting, and wipe
a damp cloth followed immediately by a dry cloth.
Press the Stop/Clear button after cleaning.
• If steam accumulates inside or around the outside
of the microwave door, wipe the panels with a
soft cloth. This may occur when the microwave is
operated under high humidity conditions and in no
way indicates a malfunction of the unit.
• The door and door seals should be kept clean. Use
only warm, soapy water, rinse then dry thoroughly.
• Metal parts will be easier to maintain if wiped
frequently with a damp cloth.
39