Servicing & Cleaning; Servicing; Keep The Inside Of The Microwave Clean; Keep The Outside Of The Microwave Clean - John Lewis JLMWGR005 User Manual

Servicing & cleaning

Servicing

This microwave must only be serviced by an authorised
service engineer and only genuine spare parts must be
used.
Under no circumstances must you attempt to repair
the microwave yourself. Repairs carried out by an
inexperienced persons may cause injury or serious
malfunction.
Keep the inside of the
microwave clean
Caution - Do not use harsh
detergent or abrasive cleaners.
• Food spatters or spilled liquids stick to microwave
oven walls and between the seal and door surfaces.
Wipe up overspills with a damp cloth straight away.
• Crumbs and soverspills will absorb microwave
energy and lengthen cooking times. Use a damp
cloth to wipe out crumbs that fall between the door
and the frame. It is important to keep this area clean
to assure a tight seal.
• Remove greasy spatters with a soapy cloth then
rinse and dry.
• The metal tray can be washed by hand and is
dishwasher proof.
Microwave oven and grill
Keep the outside of the
microwave clean
Caution - Do not use abrasive
materials, such as cleaning powders
or steel and plastic pads.
Caution - Do not use steam
cleaners.
• Clean the outside of your microwave
with soap and water then with clean water and dry
with a soft cloth or paper towel.
• To prevent damage to the operating parts inside
the microwave, the water should not be allowed to
seep into the ventilation openings.

Cleaning the control panel

• Unplug the microwave from the electrical socket
when you clean control panel with wet cloth or
spray water on control glass to clean.
- If it is not unplugged, this product can be operated
Start/Quick Start
by touching the
• To clean control panel, open the door to prevent
the microwave from accidentally starting, and wipe
a damp cloth followed immediately by a dry cloth.
Press the Stop/Clear button after cleaning.
• If steam accumulates inside or around the outside
of the microwave door, wipe the panels with a
soft cloth. This may occur when the microwave is
operated under high humidity conditions and in no
way indicates a malfunction of the unit.
• The door and door seals should be kept clean. Use
only warm, soapy water, rinse then dry thoroughly.
• Metal parts will be easier to maintain if wiped
frequently with a damp cloth.
button.
35