Advertisement
PRODUCT OVERVIEW (continued)
1: POWER IN - DC 12V power supply input.
2: POWER SWITCH - Used to power device ON or OFF.
3: BINARY DMX PATCH - DIP switches to set starting DMX Channel.
4: 3-PIN DMX OUT - Sends DMX signal to attached lighting device.
5: 5-PIN DMX OUT - Sends DMX signal to attached lighting device.
6: CHANNEL BANK - Button toggles between banks 1-6 and 7-12.
7: MASTER SLIDER - Controls total DMX output values of channels 1-6 when in Channel Bank 1-6, and
channels 7-12 when in Channel Bank 7-12.
8: FADERS (1/7, 2/8, 3/9, 4/10, 5/11, 6/12) - Direct control over corresponding dimmers of channels 1-
6 when in Channel Bank 1-6, and channels 7-12 when in Channel Bank 7-12.
9: CHANEL BANK LED - Indicates Channel Bank selected; 1-6 or 7-12.
10: BATTERY TRAY - Houses standard 9V DC Battery (not included).
BINARY DMX PATCH SETTING
DIP SWITCH ON
1
2
3
4
5
6
7
8
9
10
TECHNICAL SPECIFICATIONS
POWER INPUT
Voltage Requirements
DMX CONNECTORS
3-PIN XLR: [+] = Pin 3, [-] = Pin 2, [Ground] = Pin 1
5-PIN XLR: [open] = Pin 5, [open] = Pin 4, [+] = Pin 3, [-] = Pin 2, [Ground] = Pin 1
SIZE / WEIGHT
Dimensions
Weight (net)
RATINGS / APPROVALS
CE
Approved
RoHs
Compliant
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change
without any prior written notice.
= DMX CHANNEL
DC 12V 500mA min / 9V Battery
7.5 (L) x 5.9 (W) x 1.6 inches (H)
191 (L) x 149 (W) x 41 mm (H)
2 lbs / 0.9kgs
Elation Professional B.V. – www.elationlighting.com – SDC12
1
2
4
8
16
32
64
128
256
N/A
TM
User Manual Page 6
Advertisement
