How To Dismantle Parts - LG GRB207TUJA User Manual

Care and maintenance

How to dismantle parts

Dismantling is done in the reverse sequence of assembly.
•
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
Separate the lamp by pulling it out (➂) while
slightly striking (➀) and rotating (➁) the lamp cover.
Turn the bulb counterclockwise. Max. 40 W bulb for
refrigerator is used and can be purchased at a
service center.
To remove a shelf, lift the left part of the shelf a
bit, push it to the direction , lift the right part to
the diretion , and take it out.
Lift the door rack to direction holding both
sides and pull it out to
To remove the lamp cover, press the protrusion
under the lamp cover to the front and then pull
the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W
bulb for refrigerator is used and can be
purchased at a service center.
Separate the bin ( ) to upward.
Separate the upper rack of the refreshment
center and then pull out the refreshment
center cover ( ).
The refreshment center can be removed
by pulling it upwards.
Be sure to remove parts from the refrigerator door when removing the vegetable
•
compartment and snack corner.
To remove the vegetable compartment cover,
pull out the vegetable compartment a bit to
the front , lift the front part of the vegetable
compartment cover as shown by , and take
it out.
direction.
1
2
2
1