Table of Contents
Advertisement
Page name
Item
Page No.
<HD CUTOUT>
HD CUTOUT
C11
MODE
CUTOUT CH
CAMERA TILT
CAMERA ROLL
FOCAL LENGTH
<HFR PAINT OFFSET>
DETAIL LEVEL
C12
DETAIL CRISP
<SR Live
META
METADATA(OUTPUT)>
1st F
C13
2nd F
4K 2SI diamond marks
This function is for displaying a test pattern like the following in
the area at the bottom right of the 4K color bar when 4K
2-sample interleave output. OK is displayed if the connections
for Links 1 to 4 are correct, and OK is not displayed if they are
incorrect. This function can be used to check the connections.
NETWORK menu
Page name
Item
Page No.
<IP ADDRESS
IP ADDRESS
SETTINGS>
SUBNET MASK
N01
DEFAULT GATEWAY
SET
MAC ADDRESS
Set value
OFF, ON
SIMPLE HD,
ZOOM&PERSPECTIVE
1, 2
CENTER H
–2048 to +2047, 0
CENTER V
–1080 to +1079, 0
ZOOM
1.0 to 4.0, 2.0
–45.0 to +45.0, 0
–5.0 to +5.0, 0
7 to 500, ∞
–99 to 99, 0
–99 to 99, 0
OFF, ON
LINE9 to LINE20, LINE14
LINE572 to LINE583, LINE577
Set value
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
ENTER to execute
00:00:00:00:00:00 to
FF:FF:FF:FF:FF:FF
Meaning
HD CUTOUT function on/off setting (available only
when SZC-2001/2001M/2001W is installed)
HD CUTOUT mode selection
SIMPLE HD: HD image cut out as-is from 4K image.
ZOOM&PERSPECTIVE: When HD image is cut out
from 4K image, distortion is corrected. Zoom in/out is
supported.
Specify the cut-out frame to control.
Center position of cut-out frame (H)
Center position of cut-out frame (V)
Zoom factor
Camera tilt angle
Camera roll angle
Lens focal length (2.8× lens focal length when
LA-FZB2 is connected).
∞: Equivalent to simple CUTOUT with zoom
Sets the offset amount of DETAIL LEVEL to be added
to HD HFR video.
DETAIL LEVEL is the standard for HD normal speed
that is set from the MSU/RCP. 0 is the same as HD
normal speed.
Sets the offset amount of DETAIL CRISP to be added
to HD HFR video.
DETAIL CRISP is the standard for HD normal speed
that is set from the MSU/RCP. 0 is the same as HD
normal speed.
SR Live metadata embed on/off setting
Line number used in 1st field
Line number used in 2nd field
Meaning
IP address setting
Subnet mask setting
Gateway IP address setting
MAC address of the unit (display only)
41
Correct connections
When Link 1 and Link
2 have been swapped
Advertisement
Table of Contents
