Electric Installation; 10.5.1 General Hazard Warnings; 10.5.2 External Power Supply Unit - Bosch rexroth IndraControl XFE 01.1 Operating Manual

IndraControl XFE 01.1
A
Fig. 10: Removing extension module from top-hat rail
10.5

Electric installation

10.5.1 General hazard warnings

WARNING

10.5.2 External power supply unit

All control components are supplied from 24 V voltage supplies.
Use the Bosch Rexroth power supply unit VAP01.1H-W23-024-010-NN, part number R911171065,
for the logic supply. For further information on the external power supply unit and on the creation of
overvoltage categories, refer to the documentation of the power supply unit.
All lines of the 24 V voltage supply have to be routed separately from lines carrying higher voltages.
All peripherals, such as digital sensors or actuators connected to the interfaces of the control, also have
to comply with the criteria of safety-separated circuits.
R911345570, Edition 06
Danger of personal injury due to incorrect mounting or electric installation!
−
Avoid dangerous system states, which might cause personal injury!
−
Ensure the specified personal safety that impedes damages caused by
direct and indirect touching of parts under voltage (connection to the
protective connector, insulation, etc.)!
A
B
21 / 36
Electric installation
Bosch Rexroth AG