Location Of Parts And Basic Remote Operations; Parts Description - Sony RM-PG411 Primary Operating Instructions Manual

Location of Parts and Basic Remote
Operations
This chapter provides information on the
location of buttons and how to use them to
perform basic operations.
However, some functions explained in this
section may not work depending on the model
of the receiver.
For the functions of the receiver you purchased,
refer to the Operating Instructions supplied
with the receiver.

Parts description

TV ?/1
VIDEO1
AV1
TV/SAT
M1
TUNER
TEST
TONE
0
MPX/
DUAL
AUDIO
.
0/10
SHIFT
m
ANT
N
TOP MENU/
GUIDE
G
9
DISPLAY
TV VOL
GB
4
1
?/1
AV ?/1
USE MODE P
2
SYSTEM STANDBY SLEEP
VIDEO2 VIDEO3 DVD/LD
AV2 2ND
TAPE MD/DAT CD/SACD
3
M2
PHONO MULTI CH SOURCE
SOUND FIELD
PRESET AUTO DEC MODE
1 2 3
4
ANALOG
DIRECT 2CH
4 5 6
SWAP/ JUMP/ PRESET/
ANGLE TIME CH/D.SKIP
7 8 9
SUBTITLE ENTER
>
>10/11 12
D.TUNING DISC ALT
-
M
CLEAR SEARCH MODE
X
x
MUTING
5
AV MENU
MASTER
F
VOL
g
6
f
O
RETURN/EXIT
TV/ MAIN
TV CH VIDEO MENU
7
WIDE ON SCREEN
8
1 ?/1 switch
Press to turn the reciver on or off.
SLEEP button
Press repeatedly to activate the sleep
function and the duration which the receiver
turns off automatically.
2 AV ?/1 switch
Press to turn the selected audio and video
components under the function button, on or
off.
If you press the ?/1 switch at the same
time, it will turn off the receiver and other
Sony audio/video components (SYSTEM
STANDBY).
Note
The function of the AV ?/1 switch changes
automatically each time you press the function
buttons (3). Depending on the component, the
above operation may not be be possible or may
operate differently than described.
3 Function buttons
Press one of the buttons to select the
component you want to use. When you
press a button, the receiver turns on. The
components are factory assigned to the
buttons as follows. When you want to
assign other components, program the
remote following the steps on page 10.
Button(s)
component(s)
VIDEO1
VIDEO2
VIDEO3
DVD/LD
TV/SAT
TAPE
MD/DAT
CD/SACD
TUNER
PHONO
See the table on page 9 for information on
the buttons that you can use to control each
component.
Assigned
VCR (VTR mode 3)
VCR (VTR mode 1)
VCR (VTR mode 2)
DVD player
TV tuner
Tape deck
MD deck
CD player
Built-in tuner
Turntable