Self-Diagnosis Function; Specifications - Sony DVP-CX860 Operating Instructions Manual

Self-diagnosis function

When the self-diagnosis function activates to prevent the
player from malfunctioning, a five-character service
number (combination of a letter and digits) flashes on the
screen and on the front panel display. In this case, check
the following table.
C:13:00
First three characters Cause and/or Corrective Action
C13 •The disc is dirty.
, Clean the disc with a cleaning
cloth. (page 6)
•The disc is not facing the correct
direction.
, Place the disc in the slot so that
the playing side is facing left.
•The front cover will not open or close
C31
all the way.
, Remove any objects that may be
blocking the movement of the
front cover.
Exx (xx is any number) •To prevent a malfunction, the player
has performed the self-diagnosis
function. The front cover
automatically open and the player
enters standby mode.
, When you contact your Sony
dealer or local authorized Sony
service facility, remove all of the
discs in the player and give the
5-character service number.
(example: E:61:10)

Specifications

CD/DVD player
Laser
Semiconductor laser
Signal format system
NTSC
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz
(±1.0 dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 110 dB
(AUDIO OUT connectors only)
Harmonic distortion
Less than 0.003 %
Dynamic range
More than 100 dB (DVD)
More than 97 dB (CD)
Wow and flutter
Less than detected value
(±0.001% W PEAK)
Outputs/Inputs
Jack Output/input
type level
Phono 2 Vrms
AUDIO OUT
jacks (at 50 kilohms)
(1, 2)
DIGITAL OUT Optical –18 dBm
(OPTICAL) output
connector
Phono 0.5 Vp-p
DIGITAL OUT
jack
(COAXIAL)
Phono 1.0 Vp-p
VIDEO
OUTPUT (1, 2) jacks
4-pin Y: 1.0 Vp-p
S VIDEO
mini DIN
OUTPUT (1, 2)
C: 0.286 Vp-p
Phono Y: 1.0 Vp-p
COMPONENT
jacks
VIDEO OUT
(Y, P , P ) P , P
B
B R
0.7 Vp-p
Mini jack –
S-LINK
(CONTROL S
IN)
Load impedance
Over 10 kilohms
Wave length: 660 nm
75 ohms terminated
75 ohms,
sync negative
75 ohms,
sync negative
75 ohms terminated
75 ohms,
sync negative
:
R
75 ohms
–
79