Receiver (Amplifier) Hookups - Sony DVP-CX860 Operating Instructions Manual

Receiver (Amplifier) Hookups

This connection is for listening to the sound through
speakers connected to a receiver lacking a built-in DTS or
Dolby* Digital decoder. Refer as well to the instructions
supplied with the component to be connected.
* Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks
of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby
Laboratories. All rights reserved.
Required cords
Audio connecting cord (not supplied) (1)
White (L)
Red (R)
S video cord (supplied) (1)
CD/DVD player
AUDIO OUT
VIDEO S VIDEO COMPONENT
OUTPUT OUTPUT VIDEO OUT
Y
1 1
2 2
To AUDIO
OUT (R, L)
To S VIDEO
OUTPUT
: Signal flow
10
White (L)
Red (R)
L
L
R
COAXIAL OPTICAL
R
PCM/DTS/
2 1
DOLBY DIGITAL
AUDIO IN DIGITAL OUT
MEGA
CONTROL S-LINK
P P
B R
CONTROL S
IN
To DIGITAL OUT (OPTICAL)
Take off the cap.
To
DIGITAL
OUT
(COAXIAL)
To coaxial digital input
or
To audio input
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
If you have a digital component such as a receiver (amplifier)
with a digital connector, DAT or MD, connect the component via
the DIGITAL OUT OPTICAL or COAXIAL connector using an
optical or coaxial digital connecting cord (not supplied).
Optical digital connecting cord (not supplied) (1)
Coaxial digital connecting cord (not supplied) (1)
Do not connect the power cord to a switched AC outlet
such as the AC outlet on a receiver (amplifier). Doing so
may cause the Playback Memory, Bookmark, Disc Explorer
and menu settings to be cancelled when you turn off the
receiver.
To optical
digital input
DIGITAL IN
or OPTICAL
COAXIAL
CD
L
R
INPUT
VIDEO
S VIDEO
To S VIDEO
L
input
AUDIO
R
To an AC outlet
Receiver
(Amplifier) with
a digital
connector, MD
deck, DAT deck,
etc.
Receiver
(Amplifier)
TV