Using The Touchpad/Clickpad - Intel NUC X15 User Manual

Using the Touchpad/Clickpad

The touchpad / clickpad is a rectangular electronic panel located just below your
keyboard. Clicking twice within the 15mm x 15mm corner in the top left will
enable or disable (lighted indicator) touchpad functionality. You can use the
static-sensitive panel of the touchpad / clickpad and slide it to move the cursor.
Press the left and right bottom corners located on the bottom edge of the
touchpad / clickpad to make selections and run functions. These two buttons
are similar to the left and right buttons on a mouse. Tapping on the touchpad /
clickpad produces similar results.
Touchpad/Clickpad
Click twice here to enable
or disable the touchpad
x2
Use these bottom corners
similar to mouse buttons
LEFT RIGHT
14