Advertisement
Step Three
Insert the Front Legs (6) into the pre-drilled holes in the underside of the Headboard (1) and twist to
secure, as shown in the diagram below.
Step Four
Attach Metal Plate (7) and Wooden Leg (6) together as shown in Step 1. Make sure the arrow on the metal plate and
wooden leg line up. Attach together Wooden Leg (6) and Metal Plate (7) using Spring Washer (I) and Nut M8 (F) then
tighten with Spanner M13 (H) and Screw 3.5 x 18mm (J). Next attach the leg to the Footboard (2) and Side Rail (3) as
shown in Step 3, using Bolt M6 x 25mm (E) and Screw 3.5 x 30mm (G). Tighten the bolt with Allen Key M4 (A).
STEP 1
7
STEP 2
Spanner M13 (H)
3.5 x 18mm (J)
Spring
Nut M8 (F)
Washer M8 (I)
I.
6.
R
Spring
Legs x 2
Washer M8x2
6
6
7
6
x2
7.
H.
L
Metal plates x 2
Spanner M13 x 1
3
1
For Footboard Only
STEP 3
2
2
F.
G.
Nut M8 x 2
3.5 x 30mm x 2
4/6
6.
Legs x 2
6
M4 (A)
7
M6 x 25mm (E)
3
3.5 x 30mm(G)
3.5 x 30mm(G)
3
M6 x 25mm (E)
7
M4 (A)
6
E.
A.
M6 x 25mm x 4
M4 Allen Key x 1
J.
3.5 x 18mm x 2
Advertisement
