Canon imageRUNNER ADVANCE 8500 III Series Customer Expectation Document page 66

Booklet Finisher-X1 Table Continued
Item
Capacity Per Tray
41 The optional Paper Folding Unit-J1 must be attached.
44 If the customer is using Thin Paper or Custom Size Paper (less than 15 lb bond (59 g/m
approximately 750 sheets (or 3 7/8" (97 mm) in height).
45 1 Point Front (Diagonal), 1 Point Back (Diagonal), Two Points Center (Parallel).
IMPORTANT
The Booklet Finisher-X1 can staple any other paper type except, Transparencies,
Tracing Paper, and Labels.
Version 1 imageRUNNER ADVANCE 8500 III Series Customer Expectations Document
imageRUNNER ADVANCE 8500 III Series Customer Expectations Document
Tray Mode
No Collating, Collate,
and Group Mode
No Collating, Collate,
and Group with
Different Paper Sizes
Offset Mode
A
45
Staple Mode
41
Z-Fold Mode
41
Half Fold Mode
No Collating, Collate,
and Group Mode
B
No Collating, Collate,
and Group with
Different Paper Sizes
41
Z-Fold Mode
41
Half Fold Mode
Specifications
Paper Size
LTR, EXEC, and STMTR:
1,500 sheets (or 7 3/4" (195 mm) in height)
13" x 19", 12 5/8" x 17 11/16", 12" x 18",
11" x 17", LGL, LTRR:
750 sheets (or 3 7/8" (97 mm) in height)
750 sheets (or 3 7/8" (97 mm) in height)
LTR and EXEC:
1,500 sheets (or 7 3/4" (195 mm) in height)
11" x 17", LGL, and LTRR:
750 sheets (or 3 7/8" (97 mm) in height)
LTR and EXEC:
1,500 sheets/100 sets (or 7 3/4" (195 mm) in
44
height)
11" x 17", LGL, and LTRR:
750 sheets/50 sets (or 3 7/8" (97 mm) in
height)
11" x 17":
30 sheets (or 7 3/4" (195 mm) in height)
LGL and LTRR:
10 sheets
LTRR: 10 sheets
LTR, EXEC, and STMTR:
250 sheets (or 1 1/4" (32 mm) in height
11" x 17", LGL, LTRR:
125 sheets (or 5/8" (16 mm) in height)
Paper with a length longer than 17" (432 mm):
30 sheets
LGL, LTR, LTRR, EXEC, STMTR:
125 sheets (or 5/8" (16 mm) in height)
Paper with a length longer than 17" (432 mm):
30 sheets
11" x 17", LGL, LTRR: 10 sheets
LTRR: 10 sheets
2
)), the tray can hold
44
44
Page 66