Display Function - SMC Networks PF3A-H Series Manual

IO-Link Compatible PF3A
Supports the IO-Link communication protocol
PLC
Fieldbus
Device settings can be
set by the master.
· Threshold value
· Operation mode,
etc.

Display function

Displays the output communication
status and indicates the presence of
communication data
Operation and Display
Communication IO-Link status
with master indicator light
*
1
Yes
*
1
(Flashing)
No
OFF
*1 In IO-Link mode, the IO-Link indicator is ON or flashing.
* "ModE LoC" is displayed when the data storage lock is enabled. (Except for when the version does not match or when in SIO mode)
3
ww
*1 IODD File:
PC
Read the device data.
· Switch ON/OFF signal and analog value
· Device information:
Manufacturer, Product part number, Serial number, etc.
· Normal or abnormal device status
· Cable breakage
IO-Link Master
SIO mode
Status
Operate
Start up
Preoperate
IO-Link Version does
mode not match
Communication
disconnection
SIO mode
*2 When the lower line (sub screen) is set to mode display (Upper line for the PF3A8
H- -L -
ww w ww
Configuration File (IODD File *
· Manufacturer · Product part no. · Set value
IODD is an abbreviation of IO Device
Description. This file is necessary for setting
the device and connecting it to a master. Save
the IODD file on the PC to be used to set the
device prior to use.
Start-up mode Preoperate mode
Screen
*
display 2
Normal communication status (readout of measured value)
The IO-Link version does not match that of the master.
Normal communication was not received for 1 s or longer.
15
p.
1
)
IO-Link is an open communication
interface technology between the sen-
sor/actuator and the I/O terminal that
is an international standard: IEC
61131-9.
IO-Link Compatible Device:
Digital Flow Switch for Large Air Flow
PF3A7 H-L
w
Series
IO-Link Compatible Device:
Digital Flow Switch for Large Air Flow
PF3A8 H-L
w Series
Operate mode
Description
At the start of communication
* The applicable IO-Link version is 1.1.
General switch output
H-L)
w