Cautions And Warnings; Intended Use - Graco WHITE KNIGHT PCA300 Owner's Manual

Cautions and Warnings:

1.1. Intended Use

The PCA300 pump system is designed for ultrapure fluid and chemical dispense and transfer in industrial
production machines and equipment. Only qualified personnel shall install the PCA300 system into equipment.
All safety precautions must be followed during the installation and use of the PCA300 system.
Equipment marked with this warning symbol has the following hazards.
ELECTRIC SHOCK HAZARD:
To reduce risk of electric shock.
•
Connect only to grounded power source.
•
Disconnect power before servicing.
•
Wait 60 seconds to allow for capacitor discharge.
•
340 VDC,16 amps, 2.3 KW
BURN HAZARD
Heat may transfer to exterior surfaces when pumps operate. To avoid severe burns, do not touch
hot fluid or equipment.
HIGH MAGNETIC FIELD STRENGTH PRESENT
Pump contains several large magnets that might influence pace makers. Keep distance from pace
makers and handle pump components with care.
TOXIC CHEMICALS MAY BE PRESENT
If system has been used to pump chemicals, use the proper personal protective equipment (PPE)
when handling. Reference Safety Data Sheet (SDS) for information specific to your chemicals.
HAZARDOUS CHEMICALS MAY BE PRESENT
If system has been used to pump chemicals, use the proper personal protective equipment (PPE)
when handling. Reference Safety Data Sheet (SDS) for information specific to your chemicals
PRESSURIZED MATERIAL MAY BE PRESENT
Pumps in use contain pressurized materials. Eliminate liquid and air pressure via shut off valves
before pump is serviced or removed from the system.
MOVING PARTS HAZARDS
Pump contains moving parts. Do not open or disassemble pump.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Copyright © 2021 White Knight Fluid Handling | A Graco company
187 E. 670 S., Kamas, UT 84036
435.783.6040 888.796.2476
Version 1.0.1 | 3 December 2021 | Page 4