Table of Contents
Advertisement
Warnings
Warnings
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation
point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these
symbols appear in the body of this manual or on warning labels, refer back to these warnings. Product-specific hazard
symbols and warnings not covered in this section may appear throughout the body of this manual where applicable.
FIRE AND
AND EXPLOSION
EXPLOSION HAZARD
FIRE
FIRE
AND
EXPLOSION
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help
prevent fire and explosion:
• Use equipment only in well-ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic
drop cloths (potential static sparking).
• Ground all equipment in the work area. See Grounding
• Keep work area free of debris, including solvent, rags, and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable
fumes are present.
• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail liners unless they
are antistatic or conductive.
Stop operation
operation immediately
• Stop
Stop
operation
you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
Static charge may build up on plastic parts during cleaning and could discharge and ignite flammable
vapors. To help prevent fire and explosion:
• Clean plastic parts only in well-ventilated area.
• Do not clean with a dry cloth.
• Do not operate electrostatic guns in equipment work area.
SPECIAL
SPECIAL
SPECIAL CONDITIONS
CONDITIONS FOR
CONDITIONS
• To prevent the risk of electrostatic sparking, the equipment's non-metallic parts should be cleaned
only with a damp cloth.
• The aluminum housing may spark upon impact or contact with moving parts, which may cause fire
or explosion. Take precautions to avoid such impact or contact.
• All flameproof joints are critical to the integrity of the motor as approved for hazardous locations
and are not repairable if damaged. Damaged parts must be replaced only with genuine Graco
parts with no substitutions.
3A2526L
All manuals and user guides at all-guides.com
WARNING
WARNING
WARNING
HAZARD
HAZARD
immediately if static sparking occurs or you feel a shock. Do not use equipment until
immediately
FOR SAFE
FOR
SAFE USE
SAFE
USE
USE
Grounding instructions.
Grounding
Warnings
7
Advertisement
Table of Contents
