Use this item to refer to IGD share memory size.
Render Standby
The optional settings are: [Enabled]; [Disabled]
IGD Multi-Monitor
The optional settings are: [Enabled]; [Disabled]
PCI Express Port
The optional settings are: [Auto]; [Enabled]; [Disabled].
PEQ Force Gen1
The optional settings are: [Enabled]; [Disabled].
Detect Non-Compliance Device
Use this item to detect non-compliance PCI Express device in PEG. The optional
settings are: [Enabled]; [Disabled].
HRC Message Print
Use this item to Enable or Disable Print Memory Initialize message.
►
South Bridge
SMBUS Controller
The optional settings are: [Enabled]; [Disabled].
PE3
Use this item to Enabled/Disabled the PCI Express ports in the Chipset
PE2
Use this item to Enabled/Disabled the PCI Express ports in the Chipset
Onboard PCIE Lan Device
The optional settings are: [Auto]; [Enabled]; [Disabled]
USB 3.0 Support
The optional settings are: [Auto]; [Enabled]; [Disabled].
PCIE2PCI Support
The optional settings are: [Auto]; [Enabled]; [Disabled].
Onboard Lan BootROM
The optional settings are: [Enabled]; [Disabled].
PCIe Sub Decode
The optional settings are: [Enabled]; [Disabled].
Restore AC Power Loss
Use this item to specify what state to go to when power is re-applied after a power
failure
SLP_S4 Assertion Stretch Enable
The optional settings are: [Enabled]; [Disabled].
SLP_S4 Assertion Width
Use this item to select a minimum assertion width at the SLP_S4 signal
Azalia HD Audio
The optional settings are: [Enabled]; [Disabled].
- 24 -