WiFi | Settings | WiFi 5GHz
Wireless Setting
Interface Status: Click "Disable" button to disable WiFi, or click "Enable" to activate WiFi
function.
Network Name (SSID): SSID (service set identifier) is a label representing wireless AP. Wireless
clients would see the SSID broadcasted by AP.
Radio Channel: The channel to use. Selecting "Auto" will allow CPE to choose the best channel
automatically.
Working Mode: There are "802.11axa", "802.11a/n", "802.11ac", or "802.11a"
Bandwidth: Select the bandwidth from the drop-down list.
•
20M – Set the bandwidth to 20M.
•
40M – Set the bandwidth to 40M.
•
80M – Set the bandwidth to 80M.
•
20M/40M/80M– The bandwidth setting will automatically be switched to either 20M or
40M or 80M by CPE based on the environment.
SSID Broadcast: Having SSID broadcast disabled essentially makes your CPE invisible unless a
wireless client already knows the SSID. The default option of SSID Broadcast is "Enabled".
AP Isolation: Enable or disable AP Isolation feature
Security
Security Types Setup: There are 10 different security types provided as below –
Authentication
WiFi> Settings>WiFi 5GHz
Encryption
20