Toro 139-3235 Installation Instructions page 2

3
Installing the Right Baffle
Parts needed for this procedure:
1 Right baffle
1 Bolt (5/16 x 3/4 inch)
4 Nut (5/16 inch)
50 and 54-Inch Decks
1. Install the right baffle using 3 nuts (5/16 inch)
as shown in Figure
hand.
1. Nut (5/16 inch)
Figure 1
2. Tighten the fasteners by
Figure 2
2. Secure the rear wall of the right baffle to the
mower deck using 1 carriage bolt (5/16 x 3/4
inch) and nut (5/16 inch) as shown in
g314447
1. Nut (5/16 inch)
3. Install the nut on the discharge rod, where it was
originally removed
4. Tighten all fasteners.
60-Inch Decks
1. Install the right baffle using 2 nuts (5/16 inch)
as shown in
hand.
1. Nuts (5/16 inch)
2. Secure the rear wall of the right baffle to the
mower deck using 1 carriage bolt (5/16 x 3/4
inch) and nut (5/16 inch) as shown in
g314448
2
Figure 3
2. Bolt (5/16 x 3/4 inch)
(Figure 1).
Figure 4. Tighten the fasteners by
Figure 4
Figure 3.
g314446
g314449
Figure 5.