Table of Contents
Advertisement
1
Wear full eye and ear protection,
substantial footwear, and long trousers
at all times while operating the product.
Do not operate the product when
barefoot or wearing open sandals.
3
1
Align the visor shield slots into the tabs
on the visor shield. Push the tabs down
to lock the visor in place.
5
1
2
Connect the pole housing to the blower
housing. Turn the shaft coupling
clockwise to secure it in place.
2
Insert either scraper nozzle into the product housing slot. Turn the scraper nozzle
clockwise to secure it in place.
4
2
Insert the tab of the visor shield mount into the pole housing assembly slot. Turn
the pivot latch clockwise or counterclockwise to secure the holder in place.
6
1
Push the harness clips into their
corresponding tabs on the product.
1
2
1
7
2
Install the battery pack until the latches
snap into place. Make sure that the
battery pack is securely attached
before using the product.
Getting started
3
2
5
8
7
Advertisement
Table of Contents
