Menu /Select - VTech CS6328-2 Quick Start Manual

All manuals and user guides at all-guides.com
Intercom
Use the intercom feature for conversation between two system
handsets.
• You can use a maximum of four handsets at a time. When two
handsets are used on an intercom call, use two other system
handsets for an outside call.
• If there is an incoming call while the originating handset is
making an intercom request, the intercom request will be
stopped.
To initiate an intercom call:
Press INT when the handset is not in use.
• If you have more than two handsets, use the dialing keys to
select the destination handset.
To answer an intercom call:
Press / , , INT or any of the dialing keys on the
FLaSh
destination handset.
To end an intercom call:
Press OFF/
or place the handset back in the telephone
CLear
base or charger.
Directory
The directory can store up to 00 entries.
To add a directory entry:
. Press MeNU/ when the handset is not in use.
SeLeCT
2. Scroll to select >DIreCTOrY and then >aDD CONTaCT.
When the screen displays eNTer NUMBer:
3.
• Use the dialing keys to enter the number (up to 30 digits).
-Or-
•
Copy a number from the redial list by pressing
reDIaL/
and then press
PaUSe
reDIaL/ repeatedly to select a number. Press
PaUSe
/SeLeCT to copy the number.
MeNU
4. Press /SeLeCT to move to the name.
MeNU
When the screen displays eNTer NaMe, use the dialing
5.
keys to enter the name (up to 5 characters). Additional key
presses show other characters of that particular key.
6. Press /SeLeCT to confirm.
MeNU
While entering names and numbers, you can:
• Press /reMOVe to backspace and erase a digit
MUTe
or character.
• Press and hold /reMOVe to erase the entire entry.
MUTe
VOL/ VOL/
• Press or
CID
or right.
/PaUSe to insert a dialing pause.
• Press and hold
reDIaL
Press 0 to add a space.
•
To review and dial a directory entry:
Entries are sorted alphabetically.
/
. Press when the handset is not in use.
VOL
2. Scroll to browse through the directory, or use the dialing keys
to start a name search.
3. When the desired entry appears, press
To edit a directory entry:
. When the desired entry displays, press
When the screen displays eDIT NUMBer, use the dialing
2.
keys to edit.
/SeLeCT.
3. Press
MeNU
4. When the screen displays eDIT NaMe, use the dialing keys
to edit.
5. Press /SeLeCT to save.
MeNU
To delete a directory entry:
. When the desired entry displays, press
When the screen displays DeLeTe CONTaCT?, press
2.
/SeLeCT to confirm.
MeNU
VOL/ , VOL/
or
CID
to move the cursor to the left
/ or to dial.
FLaSh
/SeLeCT.
MeNU
/reMOVe.
MUTe
4