Installation Checkout - Kohler K-2352 Installation Manual

Install the Lavatory (cont.)
Thread a washer and nut onto each of the threaded studs from
underneath the countertop.
Tighten the nuts 1/2 turn past hand-tight with an adjustable
wrench.
Wipe away any excess sealant with a clean cloth. Fill any voids as
needed.
Allow the sealant to cure for at least 30 minutes before
proceeding.

3. Installation Checkout

Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
Run water into the lavatory and check for leaks.
Clean up with a non-abrasive cleaner.
Kohler Co. 7 1061995-2-A