Datalogic STAR Modem Device Set Up
Hide thumbs
Also See for STAR Modem:
- Brochure & specs (2 pages) ,
- Quick reference (82 pages) ,
- User manual (69 pages)
Advertisement
Quick Links
RF DEVICE SETUP FOR STAR Modem™
SETUP FOR STAND ALONE MODE
The
following
procedure
STAR Modem™ in Stand Alone Mode:
1.
2.
3.
4.
allows
configuring
Restore RF Device Default
Enter Configuration
ONLY FOR DRAGON™ M
Set Date
six digits for Day, Month and Year (DDMMYY).
Set Time
four digits for Hours and Minutes (HHMM).
an
RF
Device to communicate with
+
+
1
Advertisement
Related Manuals for Datalogic STAR Modem
Summary of Contents for Datalogic STAR Modem
- Page 1 RF DEVICE SETUP FOR STAR Modem™ SETUP FOR STAND ALONE MODE following procedure allows configuring Device to communicate with STAR Modem™ in Stand Alone Mode: Restore RF Device Default Enter Configuration ONLY FOR DRAGON™ M Set Date six digits for Day, Month and Year (DDMMYY).
- Page 2 Set RF Device Address four digits from the Numeric Table in the range 0000-1999. All RF Devices must have different addresses. STAR Modem™ Address read the code above and the four-digit address of the STAR Modem™. Exit and Save Configuration...
- Page 3 SETUP FOR STAR-System™ MODE SETUP FOR STAR-SYSTEM™ MODE following procedure allows configuring Device to communicate with STAR Modem™ in STAR-System™ Mode: Restore RF Device Default Enter Configuration ONLY FOR DRAGON™ M Set Date six digits for Day, Month and Year (DDMMYY). Set Time four digits for Hours and Minutes (HHMM).
- Page 4 SETUP FOR STAR-System™ MODE STAR-Modem™ Address read the code above and the four-digit address of the STAR-Modem™ Exit and Save Configuration...
-
Page 5: Numeric Table
NUMERIC TABLE...