Plug the charging cable's mains
6.
1
plug
into the socket.
7.2 Inserting and charging
the battery
Use the guide rail to insert the bat-
1.
tery into the vacuum cleaner.
→ Fig.
5
Fully charge the battery.
2.
→ "Charging", Page 15
Basic operation
8 Basic operation
Basic operation
8.1 Charging
Depending on the appliance features,
you can charge the battery in three
different ways.
WARNING
Risk of fire!
Improper use of the battery and the
1
rapid charger
Only charge the battery in char-
▶
gers that are recommended by the
manufacturer.
Only use the battery in connection
▶
with the Bosch appliance.
Charge the battery using the ori-
▶
ginal charging cable
ginal quick charger
Only use batteries from the Power
▶
for ALL 18 V series.
Charging using the charging
1
cable
Note: The power supply unit on the
charging cable
heat up while charging. This is nor-
mal and harmless.
1
Depending on the appliance specifications
is dangerous.
1
or the ori-
1
.
1
and the appliance
Requirement: The battery has been
inserted.
→ "Inserting and charging the bat-
tery", Page 15
Place the vacuum cleaner close to
1.
the socket.
Plug the appliance plug into the
2.
vacuum cleaner.
→ Fig.
6
Insert the mains plug into the
3.
socket.
a The status display slowly flashes
white while the battery is charging.
Once the battery is fully charged,
the status display lights up white
for a few minutes.
Tip: To check that the battery has
charged fully, briefly disconnect the
vacuum cleaner from the mains. The
status display then lights up white.
You can charge the vacuum cleaner
whenever it is not in use.
Charging in the base station
WARNING
Risk of injury!
An appliance that falls may endanger
people.
Ensure that children do not play
▶
with the appliance, even when it is
in the base station
Note: The power supply unit on the
charging cable
heat up while charging. This is nor-
mal and harmless.
Requirement: The battery has been
inserted.
Basic operation en
1
1
.
1
and the appliance
15