Table of Contents
Advertisement
If you have purchased a test disc which contains various
color test patterns and can be used to test the color
presentation on monitors, TVs, projectors, etc. You can
project any image from the disc on the screen and enter
the 3D Color Management menu to make adjustments.
To adjust the settings:
1. Go to the Picture menu and highlight 3D Color
Management.
2. Press ENTER and the 3D Color Management page
displays.
3. Highlight Primary color and press ◄/► to select a
color from among Red, Green, Blue, Cyan, Magenta,
Yellow.
4. Press ▼ to highlight Hue and press ◄/► to select its range. Increase in the range will
include colors consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right for how the colors relate to each other.
For example, if you select Red and set its range at 0, only pure red in the projected picture
will be selected. Increasing its range will include red close to yellow and red close to
magenta.
5. Press ▼ to highlight Saturation and adjust its values to your preference by press ◄/►.
Every adjustment made will reflect to the image immediately.
For example, if you select Red and set its value at 0, only the saturation of pure red will be
affected.
6. Adjusting the RGB Gain to get an accurate white point. For example, if you want to
correct a reddish white, you can decrease the R gain value. .
Yellow
RED
White
Magenta
Cyan
BLUE
GREEN
47
Advertisement
Table of Contents
