Table of Contents
Advertisement
90
Seats and stowing
Example: 12 V socket in the stowage compartment
in the front centre console
Fold up socket cap 1.
#
Insert the plug of the device.
#
Fitting/removing the floor mats
& WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road
safety of the vehicle.
Stow all objects in the vehicle securely
#
so that they cannot get into the driver's
footwell.
Always fit the floor mats securely and
#
as prescribed in order to ensure that
there is always sufficient room for the
pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.
To fit: slide the corresponding seat back‐
#
wards and lay the floor mat in the footwell.
Press the studs
1
onto the holders 2.
#
Adjust the corresponding seat.
#
To remove: slide the corresponding seat
#
backwards and pull the floor mat off the
holders 2.
Remove the floor mat.
#
Advertisement
Table of Contents
