Mercedes-Benz Mercedec-AMG GT R Owner's Manual page 340

Make sure on and off switch
#
inflation compressor is set to 0.
Insert plug 3 in a socket in your vehicle.
#
Cigarette lighter socket
R
12 V socket ( page 89).
/
R
Observe the notes on the cigarette lighter in
R
the Digital Owner's Manual
Observe the notes on sockets (
R
Press the start/stop button once to switch
#
on the power supply. ( page 104)
/
Press On/Off switch 4 on the tyre inflation
#
compressor to I.
The tyre inflation compressor is switched on.
The tyre is inflated. The tyre pressure is
shown on manometer 5.
Pump the tyre to the specified tyre pressure.
#
% The specified tyre pressure is stated on the
label of the emergency spare wheel.
4 of the tyre When the specified tyre pressure has been
#
reached, press on and off switch
tyre inflation compressor to 0.
The tyre inflation compressor is switched off.
Press the start/stop button to switch off the
#
power supply.
If the tyre pressure is higher than the speci‐
#
fied pressure, press pressure release valve
button
page 89).
/
been reached.
Unscrew union nut
#
the valve.
Screw the valve cap of the emergency spare
#
wheel onto the valve again.
Stow filler hose
#
section of the tyre inflation compressor
housing.
Stow the tyre inflation compressor in the
#
vehicle.
4 on the
6 until the correct tyre pressure has
2 of filler hose 1
1 and plug 3 in the lower
from
Wheels and tyres 337