rSSD Replacement Process
Preliminary Requirements
IMPORTANT:
Required Tools and Components
Tools:
•
o
Software Tool – SDT
o
Isopropyl Alcohol Dispenser (use only 70% IPA)
o
5IP (Torx plus) driver
o
Anti-static wrist strap (1M Ohm resistance)
o
Recommended: ESD-safe battery cover (13.5" or 15")
Components:
•
o
rSSD (If replacing refer to Illustrated Service Parts List)
(New 5IP screw supplied with component)
Prerequisite Steps:
•
Power off device – Ensure device is powered off and disconnected from a power supply.
General Safety – Check to make sure that general guidelines and ESD compliance steps are followed prior to
•
opening device. Refer to Prior to Device Disassembly section
•
Remove feet – Follow steps for Procedure-Removal (Non-Skid Feet) on
Remove C-cover – Follow steps for C-cover Keyboard Assembly Replacement Processes (Metal, Fabric) on
•
(page
24).
35
Be sure to follow all special (bolded) notes of caution within each process section.
(page
18) for details.
M1179886
(page
19).