Porter-Cable SPEEDMATIC 7539 Instruction Manual
  1. Manuals
  2. Brands
  3. Porter-Cable Manuals
  4. Power Tool
  5. 7539
  6. Instruction manual

Porter-Cable SPEEDMATIC 7539 Instruction Manual

Hide thumbs Also See for SPEEDMATIC 7539:
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction
manual
MODEL 7539
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2003 Porter-Cable Corporation
ESPAÑOL: PÁGINA 19
FRANÇAISE : PAGE 37
Plunge Routers
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
MODEL 7538
IMPORTANT
Part No. 899715 - 03-09-04

Advertisement

Table of Contents
loading

Related Manuals for Porter-Cable SPEEDMATIC 7539

Summary of Contents for Porter-Cable SPEEDMATIC 7539

  • Page 1 Plunge Routers manual MODEL 7539 MODEL 7538 IMPORTANT Please make certain that the person who is To learn more about Porter-Cable to use this equipment carefully reads and visit our website at: understands these instructions before http://www.porter-cable.com starting operations. The Model and Serial No. plate is located on the main housing of the tool.

  • Page 2: Safety Guidelines - Definitions

    Labor regulations. There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter-Cable and we have advised you.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: Read All Instructions. Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
  • Page 4 1. Keep Work Area Clean. Cluttered areas and benches invite injuries. 2. Consider Work Area Environment. Don’t expose power tools to rain. Don’t use power tools in damp or wet locations. Keep work area well lit. Do not use tool in presence of flammable liquids or gases. 3.

  • Page 5: Specific Safety Rules And Symbols

    There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter-Cable and we have advised you.

  • Page 6: Replacement Parts

    When servicing use only identical replacement parts. MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 percent of that shown on the specification plate on the tool. Several models, however, are designed for A.C.

  • Page 7: Functional Description

    NOTES FUNCTIONAL DESCRIPTION FOREWORD MODEL 7539 Porter-Cable Router incorporates a speed control that provides operating speeds from 10,000 RPM to 21,000 RPM to handle the most demanding router applications in various materials. MODEL 7538 Porter-Cable Router is designed for continuous, rugged operations to handle the most demanding routing applications.
  • Page 8 ASSEMBLY Fig. 1 A Trigger Switch B Switch Locking Button C Plunge Locking Lever Fig. 2 D Collet Nut E Chuck K Depth Rod Locking Knob Speed Selector Knob (7539 only) Depth Rod G Circuit Breaker (7538 only) M Depth Stop Turret H Depth Indicator O Travel Limiting Nuts Depth Indicator Knob...
  • Page 9 Fig. 3 Do not allow the wrenches to contact the columns (A) Fig. 3. If the columns are damaged, the plunge action will be restricted. Do not tighten the collet nut without a bit inserted to prevent collet damage. ADJUSTING PLUNGE DEPTH DISCONNECT TOOL FROM POWER SOURCE.
  • Page 10 Position the depth indicator (H) Fig. 5 at the “O” position and tighten the knob. Loosen the depth rod locking knob (K) Fig. 5, and raise the depth rod until the indicator aligns with the graduation representing the desired depth of plunge (The example in Fig. 7 shows setting for 1" plunge.) Tighten the depth rod locking knob.

  • Page 11: Operation

    ADJUSTING PLUNGE LOCKING LEVER You can adjust the plunge locking mechanism to compensate for wear or to reposition lever (in locked position). To adjust: DISCONNECT TOOL FROM POWER SOURCE. Hold the lever in the upright position (see Fig. 9). Use a phillips screwdriver to remove retaining screw (V) Fig.

  • Page 12: Overload Protection

    To avoid injury or damage to finished work, allow the motor to come to a COMPLETE STOP before putting it down. MODEL 7539 MODEL 7538 Fig. 12 Fig. 12A OVERLOAD PROTECTION MODEL 7538 is equipped with a thermal-type circuit breaker (G) Fig. 12, located in the top of the motor.

  • Page 13: Using The Tool

    SPEED CONTROL (Model 7539 only) Five operating speeds from 10,000 RPM to 21,000 RPM are available by moving the speed selector knob (F) Fig. 12A. Set the speed prior to engaging the router bit into work. To change the speed after work has begun, stop the router, remove the router from the workpiece, and adjust the speed setting.
  • Page 14 THE EDGE GUIDE Fig. 14 An accessory edge guide is available to aid in straight edge planing, parallel grooving, dado, or slotting operations. To attach, insert the grooved end of the guide rods (W) Fig. 14, in holes in base and secure with two screws (X). (NOTE: These screws should engage the groove in the guide rod.) Slide the guide (Y) Fig.

  • Page 15: Maintenance

    FACTORY SERVICE CENTER. At approximately 100 hours of use, take or send your tool to your nearest authorized Porter-Cable Service Station to be thoroughly cleaned and inspected. Have worn parts replaced and lubricate with fresh lubricant. Have new brushes installed, and test the tool for performance.
  • Page 16 ACCESSORIES A complete line of accessories is available from your Porter-Cable• Delta Supplier, Porter-Cable•Delta Factory Service Centers, and Porter- Cable Authorized Service Stations. Please visit our Web Site for a catalog or for the name of your nearest www.porter-cable.com supplier.
  • Page 17 NOTES...
  • Page 18 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period.
  • Page 19 Porter-Cable • Delta products should be obtained by contacting any Porter-Cable • Delta Distributor, Authorized Service Center, or Porter-Cable • Delta Factory Service Center. If you do not have access to any of these, call 888-848-5175 and you will be directed to the nearest Porter-Cable •...

This manual is also suitable for:

Speedmatic 7538

Table of Contents