REAR HEADREST
A
1
Positions for use
While pressing button A of lock 1,
lift the headrest as far as possible to
use it in the high position. Lower it
until it locks to use it in the low
position.
To remove it
Press button A of lock 1 then pull
out the headrest.
To refit the headrest
Insert the rods into the sleeves,
press the tabs on both rods and
lower the headrest.
Storage position
Press button A and lower the
headrest completely.
The completely lowered headrest
position is a storage position: it
should not be in this position when
a passenger is occupying the seat.
Note: for vehicles with integrated
child
headrests,
refer
information on Child headrests in
Section 1
to
the
The headrest is a safety
component, check that it is
fitted and in the correct
position.
1.19