Operational Safety Information - Rinnai Infinity 26 Touch Operation & Installation Manual

Operational Safety Information

This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
IMPORTANT
supervision or instruction concerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do not play with the appliance.
To clean your water controller(s) use a soft damp cloth
with a mild detergent.
use solvents!
Depending on the weather conditions and the length
of the pipe between the hot water unit and the
outlet in use, there may be a variation between the
temperatures displayed at the water controller(s) and
the temperature of the water at the outlet.
As a safety precaution, if a Kitchen Water Controller's
temperature is set above 50°C, transferring and then
returning 'priority' to the Kitchen Water Controller will
result in a set temperature of 50°C being selected.
When 'priority' is returned to Water Controllers other
than the Kitchen the temperature will be 42°C.
Rinnai
Whilst hot water outlets are open the set temperature
may be lowered. However they cannot then be raised
above 43°C. In addition transfer of 'priority' between
controllers is not possible. These are safety features.
after use. However, if you prefer to turn the water
maximum of 50°C will be stored in the system memory
at all times whilst mains power remains connected.
Controller when the water heater 'In Use' indicator is
the water to go cold. Someone maybe in the middle of
5 HW_CF OIM