Sealing And Fixing Sealants - MASSEY FERGUSON MF 2430 Workshop Manual

SECTION 100 - GENERAL INFORMATION
Apply the sealants given in the table to the surfaces to couple.
Prepare the surfaces in the following way before applying the sealants:
- remove any deposits with a metal brush;
- thoroughly degrease the surfaces with one of the following detergents: trichloroethylene, wash oil or
water and soda.
DENOMINATION
Weak locking
Medium-strong thread locking
Strong thread locking
Penetrating thread locking
Locker
Fixer
Super-locker
High-temperature locker
Hydraulic-hermetic
Pipe-hermetic
Thick flat-hermetic
Flat-hermetic
Hermetic plastic - spray type
Hermetic - paste type
100-16

SEALING AND FIXING SEALANTS

TYPE
Loctite 222
Loctite 242
Loctite 270
Loctite 290
Loctite 601
Loctite 641
Loctite 638
Loctite 648
Loctite 542
Loctite 572
Loctite 510
Loctite 573
Perkins Hylo-
mar power
part
USE
Weak locking and sealing
adjuster screws.
Medium-strong locking
threaded parts in general.
Highly resistant fixing, locking and sealing of
stud bolts, nuts, screws.
Capillary locking and sealing of already
mounted parts. Microporosity sealing.
Highly resistant fixing of coupling surfaces.
Medium-strong resistance fixing of bushes,
bearings, etc. Demounting possible using
normal tools.
Highly resistant fast fixing of cylindrical
parts. Dynamic work.
Fast fixing of cylindrical parts highly resist-
ant to heat.
Sealing of threaded unions on hydraulic or
pneumatic pipes up to ¾" in diameter
Sealing of threaded unions in general.
Sealing of flat surfaces.
Manual application.
Sealing of precise flat surfaces. Applied by
hand or by screen-print systems.
Sealing of cylinder head surfaces.
Sealing of sump, cover surfaces.
P/N 3681774M1
of screws,
and sealing of
Edition 01-2006