1-5. Coax Connector
1-5. Coax Connector
The COAX connector (BNC type) can be used for connec-
tion between the CCU and camera head with a BNC cable
instead of a triaxial cable. In this case, use a camera
equipped with the standalone unit (available separately)
because a power is not supplied to the camera. And a
TRIAX-to-BNC conversion connector is necessary for the
camera.
For the CCU, the following modification is required.
Disconnect the RF cable from CN8 on the DM-94 board
and reconnect it to CN9.
RF cable
CN9
CN8
1-18
CCU-700A(UC)
CCU-700AP(CE)