Clock, ambient temperature gauge
Resetting the clock
The digital clock can be reset by pressing one
of the two buttons (A and B) with a sharp object
such as the tip of a pen.
h=hours
m=minutes
Maintain the pressure on the buttons for
more than four seconds to change the time
more quickly. This does not apply to models
which only have a clock.
1: 1 2
All manuals and user guides at all-guides.com
Clock
Clock and ambient temperature gauge (certain models)
Ambient temperature gauge
(certain models)
Indicates the temperature slightly above the road
surface while driving. A red warning light (C)
comes on when the temperature is in the +2
to -5'C range.
Note! At low speeds or when the vehicle is
stationary the ambient temperature displayed
may be too high because of the heat from the
engine.
Choice of presentation
If buttons A and B are pressed in simultaneousl
it is possible to shift between four different pres
entation methods, as follows:
C
°
Press 1st time: 12 hour display and T
Press 2nd time: 24 hour display and
Press 3rd time: 12 hour display and
Press 4th time: 24 hour display and
F
°
C
°
C
°