Oki C911 Product Specification page 63

Category1 Category2
Print Secure Encrypted Job Enter Password
Job
Encrypted Job
Stored Job Enter Password
Category1 Category2 Category3
MPTray Config
Menus Tray
Configuration
45530603TX
Item Value
******
Not Found
Print
Delete
****
Not Found
Print
Delete
Category4 Item
Paper Size A3Nobi
A3Wide
A3
A4[SEF]
A4[LEF]
A5[SEF]
A5[LEF]
A6
B4
B5[SEF]
B5[LEF]
B6
Legal14
Legal13.5
Legal13
Tabloid Extra
Tabloid
Letter[SEF]
Letter[LEF]
Executive
16K(184x260mm)[SEF]
16K(195x270mm)[SEF]
16K(197x273mm)[SEF]
16K(184x260mm)[LEF]
16K(195x270mm)[LEF]
16K(197x273mm)[LEF]
8K(260x368mm)
8K(270x390mm)
8K(273x394mm)
Statement
Com-9 Envelope
Com-10 Envelope
Monarch Envelope
DL Envelope
C4 Envelope
C5 Envelope
Hagaki
Oufuku Hagaki
Nagagata#3
Nagagata#4
Nagagata#40
Yougata#0
C6 Envelope
Yougata#4
沖データ企業秘密・Oki Data CONFIDENTIAL
Defaul
Function / Notes
t
default pattern.
[Conditions for display]
.Five color printer.
Enters a password to execute Secure Print.
−
Use it in printing the encrypted authentication print job (Encrypted
Job) stored in HDD.
After inputting a password, "Searching Job" is displayed until a job
appropriate for the password is found.
(Searching time increase in proportion to the number of jobs stored in
HDD, and PX735 may take up to 20 sec.)
In searching jobs, the search can be cancelled by holding the cancel
key.
"Not Found" will be displayed where a file, which can be output is
unavailable.
The following message will appear if a printable file is available.
Encrypted Job
Print
Delete
A set of all job will be printed if "Print"is selected and the OK button
is pressed.
The following message will appear if "Delete"is selected.
Are You Sure?
Yes
No
It will goes back to the source MENU if "No"is selected.. All job will be
deleted if "Yes"is selected.
Print jobs with encrypted authentication stored in HDD are deleted by
a delete method specified by the driver after printing or delete
instruction from the menu.
−
Enters a password to execute Secure Print.
−
Used to print out a stored job in a HDD.
If there is no file can be output, "Not Found" is displayed.
When there is a printable file, the following messages are displayed.
Stored Job
Print
Delete
When select "Print", "Set Collating Amount" is displayed and the
number of pages to print can be specified.
Specify the number of pages to print and press the OK switch button,
so that all the jobs are printed out as much as the specified pages.
When select Delete, the following messages are displayed.
Are You Sure?
Yes
No
If No is selected, the previous menu display resumes.If Yes is
selected, delete all the jobs.
−
Value Default
Sets the paper size for MPTray(Multi-Purpose Tray).
[SEF] means an icon which might show 'Short Edge
Feed'.
*A [LEF] means an icon which might show 'Long Edge
Feed'.
*L
Valid
機能
Valid
JE
- 63/130
ET
ET
ET
ET