Oki C911 Product Specification page 109

Priority Status Message
304 1 Change %MEDIA_SIZE% %MEDIA_TYPE% in
MPTray
2 Press OK Button
3 Please see HELP for details
305 1 Press OK Button for Restoration
2 Memory Overflow
3
306 1 Protec Paper Error
2
3
307 1 Protec Paper Error
2
3
308 1 Trust Paper Error
2
3
309 1 Trust Paper Error
2
3
310 1 Trust Paper Error
2
3
311 1 Protec Paper Error
2
3
312 1 Protec Paper Error
2
45530603TX
Ready Atten
LED LED
indicate paper orientation after Paper Size.
Off Blink The size of paper or media type in the tray does not match the print data.
Load paper in tray
(It takes a while until the status disappears after you have closed the tray and the lever
lifted.)
Error 460 : MPTray
The paper size displaying form of the custom mode is the same as above.
Paper size displays in Custom mode: "<width>x<length> <unit>"
ex.) 210x297 mm
8.5x11.0 inch
A user needs to press ONLINE key after changing the paper.
If Media_Size has both portrait and landscape, %MEDIA_SIZE% displays icon which
indicate paper orientation after Paper Size.
Off Blink Memory capacity overflows due to the following reason.
Press ON-LINE switch so that it continues. Install expansion RAM or decrease the data
amount.
- Too much print data in a page.
- Too much Macro data.
- Too much DLL data.
- After frame buffer compression, over flow occurred.
Off Blink This error occurs if a received job does not meet the security level designated by a printer
administrator. A printing operator is not using the printer driver that is specified by a
security manager of the printer.
Displays a warning on the operation panel as waiting for key press. Does not print the job
that is being processed. (The same operation as job reset)
Off Blink Density of the destination image for a woven pattern is greater than that of the woven
pattern. A user must take measures such as increasing density of the woven pattern or
decreasing density of the input image.
Displays a warning on the operation panel as waiting for key press. Does not print the job
that is being processed. (The same operation as job reset)
Off Blink This error occurs when capacity of specified information to be embedded exceeds the
capacity that can be embedded in the woven pattern. A printing operator must reduce data
to be embedded in the woven pattern.
Displays a warning on the operation panel as waiting for key press. Does not print the job
that is being processed. (The same operation as job reset)
Off Blink Density of the destination image for woven pattern is greater than that of the woven
pattern. A user must take measures such as increasing density of the woven pattern or
decreasing density of the input image.
Displays a warning on the operation panel as waiting for key press. Does not print the job
that is being processed. (The same operation as job reset)
Off Blink The area specified for tampering verification is incorrect.
This error occurs when an image is pushed away or the unprintable area is specified.
Off Blink Size of information to be embedded is greater than paper size. It is required to reduce
information to be embedded or increase print paper size to make prints.
Off Blink NTP server setting is not correct. Print JOB is canceled because it judged that the correct
time is impossible to enter. Users need to change the setting of NT server.
− 109／130
沖データ企業秘密・Oki Data CONFIDENTIAL
Function Status level Status code
Error code
Error 480yy
460
Error 30097
420
Error 30966
421
Error 30967
422
Error 30968
423
Error 30969
424
Error 30965
425
Error 30964
426
Error 30960
427