Roll Paper Is Not Fed Automatically - Canon imagePROGRAF GP-4000 Online Manual

Roll Paper Is not Fed Automatically

Check the paper settings.
Check 1
Select Enable for Roll paper auto feed on Paper-related settings.
Paper-related settings
Check the setting for Paper retention settings.
Check 2
Select While feeding for Paper retention settings on Paper-related settings.
Paper-related settings
Make sure automatic paper feed can be used for the roll you are using.
Check 3
Refer to "Paper Setting List(Roll Paper)" to make sure automatic paper feed can be used for the roll you are
using.
Paper Information List
Make sure the roll is being fed.
Check 4
If not, feed the roll manually.
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Make sure the paper width of the roll is 250 mm or more.
Check 5
The auto feed function does not support paper with a width of less than 250 mm.
If you use the roll with paper width less than 250 mm, select Disable for Roll paper auto feed on Paper-related
settings and feed paper manually.
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Are you using an old roll holder?
Check 6
Be sure to use the roll holder supplied with the printer.
If the problem is not solved after trying Checks 1 to 6, select Disable for Roll paper auto feed and feed the
paper manually.
Paper-related settings
676