15 TUNING THE ENGINE
15.1
15.2
102
Checking the play in the throttle cable
400192-11
Adjusting the play in the throttle cable
Info
If the correct routing of the throttle cable has already been secured, the fuel tank does not need to be
removed.
S03442-10
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
A
throttle cable
.
Play in throttle cable
»
If the throttle cable play does not meet the specified
value:
–
Adjust the play in the throttle cable.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handle-
bar to and fro over the entire steering range.
The idle speed must not change.
»
If the idle speed changes:
–
Adjust the play in the throttle cable.
Preparatory work
–
Turn tap handle of the fuel tap to the OFF position.
–
Remove the air filter box cover. (
–
Remove the seat. (
p. 59)
–
Remove the right side cover. (
–
Remove the fuel tank.
–
Check the throttle cable routing. (
Main work
–
Move the handlebar to the straight-ahead position.
–
1
Push back sleeve
.
–
Ensure that the throttle cable sleeve is pushed all the way
2
into barrel adjuster
.
–
3
Loosen nut
.
2 ... 3 mm (0.08 ... 0.12 in)
(
p. 102)
(
p. 102)
p. 60)
p. 64)
(
p. 65)
p. 73)