Activating Launch Control - Husqvarna FC 250 2022 Owner's Manual

8 RIDING INSTRUCTIONS
8.3
28
H02629-10
400733-01

Activating launch control

Info
The launch control helps the rider to generate optimum motorcycle acceleration at the beginning of a
race. The maximum speed of the engine with the throttle valve fully opened (full throttle) is reduced.
After the start, it is gradually increased up to the maximum engine speed. The clutch must be operated
exactly as it would be without launch control activated.
H02884-01
–
1
Remove plug-in stand
–
Shift the transmission to the neutral position.
Condition
Ambient temperature: < 20 °C (< 68 °F)
–
Push the cold start button in all the way.
–
Press start button .
Info
Press the start button for a maximum of 5 sec-
onds. Wait for 30 seconds before a further attempt
at starting.
At temperatures below 15 °C (60 °F), several
attempts at starting may be necessary to warm-up
the lithium-ion battery and thereby increase the
starting power.
During the starting process, the malfunction indi-
cator lamp lights up.
Condition
The motorcycle is stationary.
The engine is running at idle speed.
The transmission is in neutral.
–
Press and hold the MAP and TC buttons simultaneously.
The malfunction indicator lamp flashes orange rapidly.
.