D-Link DIR-822 User Manual page 197

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Router
User Manual
Parameter
Duration
Time
Days of week
Day of month
In the advanced mode, you can specify more parameters for the schedule using a cron expression.
To do this, select the Advanced mode choice of the radio button and specify the needed values in
the fields displayed. You can specify one value or several values separated by a comma. You can
use the character * (asterisk) to specify the entire range of possible values. Upon that the Schedule
field will be filled in automatically.
Click the SAVE button.
To edit a schedule, in the All Tasks section, select the relevant line in the table. In the opened
window, change the needed parameters and click the SAVE button.
To remove a schedule, in the All Tasks section, select the checkbox located to the left of the
relevant line in the table and click the DELETE button (
To assign a created schedule to a task which will be applied to a filter rule or will enable/disable
Wi-Fi connection, go to the relevant page of the web-based interface of the device.
Every week: When this value is selected, the names of days of the
week and the Time field are displayed in the section.
Every month: When this value is selected, the Day of month and
Time fields are displayed in the section.
Specify the interval during which the task will be performing.
Specify the time when the task should start running.
Select a day or days of the week when the task will be performing.
To do this, select the checkbox located to the left of the relevant
value.
Specify a day of the month. You can specify one value or several
values separated by a comma.
Page 197 of 213
Configuring via Web-based Interface
Description
).