Frigidaire GLEQ2152CES0 Operating Instructions Manual

Before Operating Your Dryer

Read your dryer Owner's Guide. It has important safety
and warranty information. It also has many suggestions for
best drying results.
To reduce the risk of fire, electric shock or
injury to persons, read the IMPORTANT SAFETY INSTRUC-
TIONS in your dryer Owner's Guide before operating this
appliance.
Operating Steps
Read "Drying Procedures" in your Owner's Guide. It ex-
plains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric softener
sheet. Close the door.
4. Select the cycle and drying temperature for each load. To
change the temperature, turn the TEMP knob to the de-
sired temperature.
5. A suitable drying temperature, dryness level and options
will automatically be displayed for each cycle. To change
the temperature or dryness level, press TEMP or DRY-
NESS until the desired selection is made. To select an
option, press OPTIONS until the indicator for a desired
option flashes, then press SELECT.
steps to delete an option. If a temperature, dryness level
or option is not available for a cycle, it will not light.
DRYER OPERATING INSTRUCTIONS
6. The changes you make will be remembered the next time
that cycle is selected. See the "Dryer Settings Chart" for
more details.
7. Press START to begin the cycle.
•
To pause the cycle or change settings,
press PAUSE/CANCEL once.To resume
the cycle, press START again.
•
To stop or change the cycle, press
PAUSE/CANCEL twice.
8. A signal will sound at the end of the cycle and periodically
during Press Saver when the Cycle Signal option is se-
lected. When the cycle ends, remove items immediately
and hang or fold.
9. Clean the lint screen after every load.

Cycle Selection

For best results, follow the fabric care label instructions on
items to be dried.
Auto Dry
Applies to Towels, Bulky, Normal, Perm Press and Delicate
cycles. Auto Dry cycles take the guesswork out of drying
time. The load will automatically be dried at the selected tem-
perature to the desired dryness level. The dryer senses the
Follow the same
moisture level of the load as it tumbles through heated air.
Auto Dry cycles save time and energy and protect
fabrics.When the load has reached the selected dryness
level, it will continue to tumble, unheated, during a Cool Down
period. This helps reduce wrinkling and makes items easier
to handle during unloading.
Drying time varies depending on size and dampness of load,
weight and fabric type. Room temperature and humidity, type
of ventillation system, electrical voltage or gas pressure can
also affect drying time.
Towels
Select this Auto Dry cycle for towel loads.
Normal
Select this Auto Dry cycle for cotton items.
Perm Press
Select this Auto Dry cycle for cottons and blends with a no-
iron finish.
Delicate
Select this Auto Dry cycle for knits and delicate items.
Quick
Select this cycle to quickly dry a small load made up of just a
few items. It provides approximately 20 minutes of tumbling
followed by a 10-minute cool down period.
PN 134508800 (0502)