Frigidaire GLEQ221AS2 Operating Instructions

*
*
Versión en español
Si desea obtener una copia en español de estas
Instrucciones de Funcionamiento, sírvase escribir a la
dirección que se incluye a continuación. Solicite la
P/N 134088600.
Spanish Owner's Guides
Frigidaire Company
P. O. Box 212378
Augusta, GA 30917

Before Operating Your Dryer

Read your dryer Owner's Guide. It has
important safety and warranty information. It
also has many suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Owner's
Guide before operating this appliance.

Operating Steps

Read Drying Procedures in your Owner's Guide.
It explains these operating steps in detail.
Printed in U.S.A.

OPERATING INSTRUCTIONS

*
1. Prepare items for drying.
2. Check that lint screen is clean and in
place.
3 . Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Dry Temperature control.
6. Turn cycle selector to desired setting.
7. Start dryer. Push the Start Button for 2
seconds, or turn the Turn to Start control
clockwise to "ON", hold for 1-2 seconds and
release.
8. A signal will sound at the end of the cycle.
Remove items immediately and hang or fold.
9. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care labels.
To avoid fire hazard, do not use
heat to dry items containing feathers or down,
foam rubber, plastics, or similarly textured, rubber-
like materials. Use Air Fluff-No Heat setting only.
The REGULAR-HIGH HEAT, PERM PRESS-
MEDIUM HEAT(some models), and KNITS/
DELICATES-LOW HEAT temperature settings
may be used with any cycle setting. The AIR
FLUFF-NO HEAT setting (some models) can be
used only in the Timed Dry cycle.
AIR FLUFF-NO HEAT setting (some models)
tumbles the load without heat. Use Air Fluff to
freshen clothing, pillows or blankets, or to dust
draperies.
P/N 134058200 (0106)