System - D-Link Covr-C1203 User Manual

Section 3 - Configuration
This page will allow you to back up, restore configuration settings, or restore
settings from a previous backup, reset, and set up a reboot schedule for the
device. On the System Admin page click System.

System

Click Save to download a backup of your current configuration settings
Save Settings To
to your local hard drive. This backup can later be used to restore your
Local Hard Drive:
settings.
Click Select File to browse your local hard drive for a configuration file
Load Settings
to restore your configuration settings from. Once selected, click Restore
From Local Hard
to apply the settings from the configuration backup.
Drive:
Click Restore to restore all configuration settings back to the settings
Restore To Factory
that were in effect at the time the device was shipped from the factory.
Default Settings:
Any settings that have not been saved will be lost, including any rules
that you have created.
Auto Reboot Configuration
Click the Reboot to reboot the device immediately.
Reboot the
Device:
Use the drop-down menu to select a schedule for the device to
Auto Reboot:
automatically reboot. The schedule may be set to Never, Daily, or
Weekly. Depending on your selection, set a time and date for the
auto reboot schedule.
Click Save when you are done.
D-Link COVR-C1203 User Manual
System
66