D-Link Covr-C1203 User Manual page 26

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service
Provider (ISP) uses a PPTP connection. Your ISP will provide you with a
username and password.
Enter the PPTP server IP address provided by your ISP.
PPTP Server:
Enter the username provided by your ISP.
Username:
Enter the password provided by your ISP.
Password:
Select either Always on, On demand, or Manual.
Reconnect Mode:
Enter a maximum idle (in minutes) time during which the Internet
Maximum Idle
connection is maintained during inactivity. To disable this feature,
Time:
select Always on as the reconnect mode.
Advanced Settings
Select Static IP if your ISP assigned you the IP address, subnet mask,
Address Mode:
gateway, and DNS server addresses. In most cases, select Dynamic IP.
If you selected Dynamic IP as the Address Mode:
Enter the primary DNS server IP address assigned by your ISP. This
Primary DNS
address is usually obtained automatically from your ISP.
Server:
Enter the secondary DNS server IP address assigned by your ISP. This
Secondary DNS
address is usually obtained automatically from your ISP.
Server:
Maximum Transmission Unit - you may need to change the MTU for
MTU:
optimal performance with your ISP.
D-Link COVR-C1203 User Manual
PPTP
22