D-Link Covr-C1203 User Manual page 69

Section 3 - Configuration
Advanced Settings - LED Control
Choose to enable or disable the COVR status indicator LED on
Status LED:
the top panel. When disabled, the LED will no longer light up
solid white during normal operation and will instead turn off.
The LED will still light up in the corresponding color and mode in
any of the following circumstances:
-Firmware upgrade
-Device reboot
-Establishing a WPS connection
-Weak uplink signal
-No uplink signal
Once any of the above situations has ended, the LED will briefly light
up solid white and then turn off again.
Click Save when you are done.
D-Link COVR-C1203 User Manual
Admin (Continued)
65